What food grade really means.
Food grade is printed on a great many things and certifies none of them. Three different claims are used as though interchangeable, and only one of them means a laboratory has tested the equipment being purchased.
Food grade is printed on a great many things. It is not a certification, and on its own it carries no verified meaning. This article sets out what the term covers, what the law requires, and what to request from a supplier.
Three claims that are not the same.
Marketing blurs three very different claims.
Only independent certification counts. In a commercial kitchen the risk is yours, and ignorance is not a defence.
The declaration has to travel with the product.
In the EU, Article 16 of Regulation (EC) 1935/2004 requires food contact articles to be accompanied by a written Declaration of Compliance, sometimes called a Declaration of Conformity, its contents set out in Annex IV of Regulation (EU) 10/2011. In the US the equivalent is FDA 21 CFR 175 and 177. If a piece of equipment is sold for use in a professional food environment, that declaration must be included.
It should be a detailed document covering the CE position and the food regulation testing results, not a single line of reassurance.
What migration testing actually is.
Migration testing measures what moves out of the equipment and into the food. A laboratory exposes the actual food contact parts to standard test liquids, called simulants, for a defined time at a defined temperature, then measures what has transferred. The results are reported against the legal limits.
This is why the phrase food grade on its own is not enough. It describes a material in principle. Migration testing measures the finished part in practice.
What a complete answer looks like
Migration test summary
Finding vs limit
Our own results, from an independent accredited laboratory, against EU 10/2011 and FDA 21 CFR 177, REACH and BPA free, CE through Intertek. This is the kind of evidence to ask any supplier for. Full food safety and certification.
Professional equipment versus consumer equipment.
What separates a consumer product from a professional one is material selection and tolerances, and those materials must also pass food migration testing. Lead free brass, for instance, costs more than ordinary brass and is harder to source in small volume.
Do not ask only about the seals. Ask which metals or plastics sit in the migration path, from the material container through to the nozzle. Stainless steel is a good answer, though it costs more and is not commonly used, and in markets such as the United States food grade stainless has to carry a minimum of around 18 percent chromium. These are the details a maker outside the food industry often doesn’t know to check, and it’s exactly where cheap equipment falls down.
What to ask for when you buy.
When you buy equipment for food work, make sure it comes with a Declaration of Conformity. Ask us the same question you would ask anyone else.
Please send the Declaration of Conformity for this model, with the supporting independent laboratory test report showing which tests were carried out, the simulants used, the time and temperature conditions, and the results against the applicable limits.
A supplier holding the documentation can answer in a single email. A reply consisting only of the phrase food grade is itself an answer.
The professional tool
Certification we will send you today.
Independent laboratory testing against EU 10/2011 and FDA 21 CFR 177, with the results published, not promised.